What are the faults of the oven and a list of solutions!

The oven is one of the necessary equipment for restaurants. Many times, large restaurants will also have multiple commercial ovens of different styles. These ovens can help chefs easily handle various types of ingredients and are one of the best assistants for chefs. one. But ovens often have a lot of malfunctions, so what are they specifically? Let Hong Kong Junhong Electrical Repair's recent example of repairing the Hongling oven be explained.

1. Failure of insufficient temperature

Insufficient temperature is one of the biggest problems encountered by the oven. Insufficient temperature causes the dishes to be unable to be cooked at normal temperatures. It is precisely because of this that the restaurant's operation was ultimately hindered. So insufficient temperature is a big problem.

1. The thermometer is a section for checking the temperature. But if the temperature button on the control panel has malfunctioned, then the temperature may not reach the standard it should be. In other words, the thermometer did not measure the actual temperature of the product inside, resulting in differences in the displayed temperatures. Therefore, you only need to use a multimeter to check whether there is a problem with the power supply or current flow, causing the final thermometer to fail to operate normally. It just needs to be repaired or replaced.

2. System problems. This is what we call computer board failure. Once a computer board failure occurs in an oven, the computer board basically needs to be replaced. However, for some brands, it may be used for a long time, resulting in the original accessories being no longer produced. For example, the Hongling oven is It is a relatively niche brand, so it is not easy to find original accessories. The masters of Hong Kong Junhong Electrical Repair have some experience in all brands, so even if they cannot provide original configuration, they will repair or repair it. The entire replacement is handled flat.

2. Unable to start, or the temperature does not meet the standard.

Some ovens cannot be started, or the temperature does not meet the standard. Some chefs will say that the motor must be broken, or the computer board may be broken, etc. But in fact, there are many small factors that will affect it, especially today's electrical equipment. Because it needs to be sealed before it can be turned on, the sealing strip has also become a key factor. Therefore, after checking the problem with a multimeter, you need to deal with it by replacing the rubber edge of the oven.

Hong Kong Junhong Electrical Repair has better repair methods for many oven problems and can provide customers with more support.