What should I do if the water heater fails? Hong Kong Junhong teaches you how to solve it easily.

There are actually two main types of water heaters today. One is electronic, which operates and heats through a motor. There is also gas, which is heated by igniting gas. But no matter which type of water heater it is, there will always be failures. Relatively speaking, gas water heaters are often suitable for large volumes of water, while electric water heaters are often used for small areas of water. Therefore, water heaters like Xingpai often come in two different styles. Therefore, by repairing the Xingpai water heater, let’s briefly talk about the problems encountered by the water heater and how to solve them.

1. Turn on the switch and do not start.

1. If it is an electric water heater, then it is often caused by unstable power supply or motor failure. After turning on the water heater, you can check the corresponding fault and perform repairs.

2. If it is a gas water heater, there may be no gas. If it is in arrears, you need to pay a fee. It is also possible that the igniter is damaged. You only need to disassemble it and replace the igniter.

2. After turning it on, the water temperature is not hot.

1. The electric water heater may be unable to heat due to insufficient current flowing through the motor and cannot reach the original temperature standard, so the water temperature is not hot. If the power supply is normal, then you need to check whether the heating pipe is damaged. Generally speaking, if the external environment is relatively humid, it may cause damage to the heating pipe, so there is not enough temperature. Another possibility is that the thermometer is malfunctioning, causing the temperature to appear to have been adjusted, but in fact it has not reached the temperature it should be. Therefore the water temperature is not hot either.

2. The problem with gas water heaters is that after the pipe is blocked, the pressure is low, so the flame is not enough for heating. It is also possible that the diameter of the pipe is too large, causing the flames to spread and ultimately not be heated by enough heat. Hong Kong Junhong Electrical Maintenance Master can directly close the valve of the water inlet pipe and increase the set temperature of the water heater to check whether the water temperature changes.

3. No matter what type of Xingpai water heater it is, it requires a corresponding exhaust method, so sometimes if there is a problem with the fan, it will also cause temperature problems.

The above is Hong Kong Junhong Electrical Maintenance's fault explanation and maintenance plan for Xingpai water heaters. It can also explain many problems that water heaters will encounter by repairing Xingpai water heaters. This allows users to know more about the water heater.