1. Common faults of bone cutters and how to repair them!

As the name suggests, a bone cutter is a device used to cut bones and other large meats. With this equipment, not only can individual restaurants save the brute force of chefs, but it can also improve the efficiency of production and packaging for meat manufacturers in the production chain. However, high-intensity bone cutter operation will inevitably cause malfunctions. Today, we will take the relatively high-end Siemens bone cutter as an example to introduce common bone cutter faults and how to repair the bone cutter.

Generally speaking, manual bone cutters often directly involve the problem of cutters and chains. The situation with automatic bone cutters is more complicated. For the more experienced Hong Kong Junhong Electrical Maintenance Company, we will consult customers in advance about the corresponding product model and specific fault status. This ensures that the repair can be completed in one visit. Otherwise, it is very likely that the need to replace some accessories will lead to multiple visits, affecting the manufacturer's work project.

1. Failure analysis and solution of the bone cutting machine that cannot be started:

1. Power failure or switch failure. It may be caused by the bone cutter's power supply not being turned on, or insufficient power supply. You can try to check the wiring and replace the socket to solve the problem. If the power supply is found to be normal, it may be that the motor is faulty. The master is required to disassemble the Siemens bone cutter and replace the original motor. If it is a switch problem, you only need to repair the switch.

2. Transmission mechanism failure. The transmission mechanism is a very important part of the bone cutter, which is mainly composed of three parts: transmission belt, transmission system and gears. Therefore, if you turn on the computer, you will hear sound, but it will not start. Then you need to check these three parts. Whether the transmission belt is loose or damaged; whether the gears of the transmission system are worn; if the entire system fails, the computer board needs to be replaced or the operating system needs to be checked.

2. Fault analysis and solutions that can start but cannot perform growth cutting:

1. The tool or chain is damaged. If there is a problem with the cutter and chain of the bone cutter, the cutter will not be able to cut, and the chain will not be able to ensure sufficient strength to stretch. Replacing these accessories can solve the problem.

2. The joints of the bone cutter are not thoroughly cleaned. Personal bone cutters are easy to clean because they are relatively small. However, if the manufacturer operates the equipment systematically, dirt will often accumulate on the surface or joints of the equipment, making it difficult to clean. It is necessary to shut down the equipment, inspect it carefully, and clean the machine regularly to ensure that the surface is clean.

The above is the failure analysis and solution of the bone cutter repaired by Hong Kong Junhong Electrical Maintenance Company. In addition, there are generally set range standards for the thickness of frozen meat. If the meat does not meet the requirements of the bone cutter, it will not operate normally.