To repair Parex water heater, just take the right medicine!

There are many different styles of water heaters, some are for home use and some are suitable for public places. And there are many brands, with different powers, models, and styles. It just so happened that Hong Kong Junhong Electrical Maintenance recently encountered a project to repair Parex water heaters. It just so happened that today we can answer the specific water heater failure problems.

1. After the boiling water stove is ignited, the water temperature is not hot.

1. Check whether current is passing through. If the water boiler has no electricity, it will naturally be impossible to start it. Measurement can be done with an electric pen.

2. If the electric pen measures the current passing through, but the water temperature is still not hot, then you need to check whether the heating tube is faulty. You can first disassemble the casing to check whether the heating tube is burned out or damaged. If necessary, just replace it directly.

3. If the heating tube does not malfunction, it may be a problem with the thermostat. The thermostat is actually the control panel. If there is a problem with the temperature control, it is actually equivalent to an overhaul. Hong Kong Junhong electrical repair technicians often check whether it can be repaired first, and if it cannot be repaired, then replace it.

2. Water seepage and electricity leakage problems, solutions

1. If there is water leakage from the water heater, it is usually because the sealing of the water tank is not strong enough, or the water pipe is damaged. At this time, it is necessary to turn off the power in time and check the sealing problem. If there is a problem with the seal, it needs to be repaired and replaced in time.

2. If the water heater has leakage, be sure to turn off the power to prevent water from flowing out from the leakage switch, otherwise it will easily cause risks. And also need to check the condition of the heating pipe. If there are no problems in other places, it is caused by the fault of the leakage protection switch, and the switch must be replaced. In addition, electric leakage is a big problem, so you must ask maintenance personnel to repair the Parex water heater.

3. Other common faults: small water flow, noise, etc.

1. Faucet inspection is a must. Low water flow or sluggish water flow may be caused by water quality problems that lead to clogged faucets or water pipes. Just need to clear it and the problem will be solved.

2. The sound may be caused by unstable installation of the equipment or loose heating accessories.

If you want your water heater to work stably for a long time, you must pay attention to regular cleaning and maintenance. After all, the water heater involves power supply problems, so whether it is repair or replacement, it needs to be handled by a professional maintenance team. Do not start it blindly to avoid risking your life.