You must remember these tips when repairing your refrigerator

The refrigerator is an important appliance that every family cannot leave without. Because it plays such an important role, it needs to be properly treated and maintained. However, any household appliance will have a certain service life. When the refrigerator breaks down, how should it be repaired? Be sure to remember these few tips.

1. How to avoid refrigerator failure

1. Regular cleaning; if you want your refrigerator to last longer, you need to be good at maintaining it, especially regular cleaning. Food dust and dirt in daily life are important causes of electrical failure.

2. Avoid overloading; parents of the older generation always like to store everything in the refrigerator, but they don’t know that it will cause the refrigerator to overload. Whether it is the top of the refrigerator or the inside, it is necessary to control it, rather than overstuffing it, causing the refrigerator to overload. The seal is not tight.

3. Use electricity safely; it is common to see several electrical appliances connected to one socket in a home. This excessive load is placed on the electrical appliances, especially when multiple high-power devices are connected to the same socket at the same time, which can easily lead to short circuits or even overloading of other circuits. , causing danger.

4. Check the power cord and plug regularly; in daily use, the power cord and plug are the parts of electrical appliances that are more prone to problems. Make it a habit to regularly check whether the components are damaged, aged or overheated, so that problems can be discovered in time.

2. Tips for repairing refrigerators

1. When the drain hole is clogged: When encountering this kind of problem, you must first rule out whether the drain hole has not been cleaned for a long time and food residue has entered the drain hole and caused the blockage. As a solution, first unplug the power, and then take out the plastic long pipe in the drain hole. For the plug, use a long strip to insert into the drainage hole of the refrigerator compartment to clear it. After clearing it for two to three times, pour a cup of water to test whether it has been successfully cleared.

2. Poor cooling: When the refrigerator has poor cooling, first check whether the thermostat is adjusted too low. When the voltage is too low, the voltage cannot be driven, or the refrigerator has a large power, which will cause poor cooling.

3. The refrigerator makes noise: Under normal circumstances, most refrigerators are in silent mode. Once there is a loud noise or other noises, the first thing to check is whether the placement is uneven, whether the gap is too narrow, and whether the evaporation Whether the disk position is correct, etc.

Hong Kong Junhong Electrical Repair shared some tips on repairing refrigerators. At the same time, you need to pay attention to the fact that the problems that need to be repaired by the refrigerator are not simple. It is recommended that when an individual cannot handle some professional problems, he must find a professional repair company in time. At the same time, he must be good at Maintaining your home appliances ensures they last longer.