These steps must be followed to repair the ice machine

Repairing the ice machine is not a simple matter. It requires excellent professional skills and fine operating spirit to better ensure that the ice machine reaches normal functions and can operate stably for a long time after repair. During the repair process, there are What are the specific steps?

a preparation stage

1. Power outage: The first step in any home appliance repair is to turn off the power switch, and at the same time confirm that all power-related parts have been completely powered off to ensure safety during the repair process.

2. Tools and spare parts: Through the maintenance meeting, we learned that we need to prepare some necessary maintenance tools and corresponding accessories to ensure that they can be solved at one time during the maintenance process instead of frequently lacking different parts or even maintenance equipment. Therefore, during the preparation process Some necessary equipment such as screwdriver sets, multimeters, welding tools, etc. need to be carefully checked to ensure that they are fully prepared. Most of the accessories will use sensors, circuit boards and other parts.

3. Fault information notes: At any time, information notes must be made on the cause of the fault and problems during the maintenance process, and even after the repair, to ensure that the entire process can be traced and that information is recorded, so that when the problem occurs again, the source of the problem can be found in time. .

1. Repair ice machine

1. Observe before repairing: For example, the appearance of the ice machine, whether there is obvious physical damage or other abnormalities.

2. Test: Use professional instruments to test the electrical system and refrigeration system of the ice machine to check whether the system is intact or whether there are any problems. In particular, the voltage, current, refrigerant pressure, etc. need to be carefully tested to facilitate Find out the fault problem.

3. Locate the fault: After the above operations, the fault diagnosis results can be obtained, and the specific location and cause of the fault can be accurately determined. At this time, maintenance can be continued, such as replacing damaged parts, adjusting parameter settings, and cleaning. Maintenance, with the specific cause of the fault, repair will naturally be more convenient, but you need to pay attention to keeping the working environment clean and orderly during the maintenance process, especially spare parts and maintenance equipment, placed in a clean environment, easy to handle, and not Easy to confuse.

2. Maintenance follow-up work

1. Debugging: After the maintenance work is completed, the first task is to test. System debugging of the ice machine is used to detect and verify the maintenance effect and ensure that the maintenance is successful.

2. Cleaning; many people will find that after repairing a certain home appliance, they often cannot find various tools or even spare parts. The key problem is that there is no fixed action. After the equipment repair is completed, After the test is normal, all spare parts and maintenance equipment must be put away one by one before starting to do other things.

The above is the relevant process of Hong Kong Junhong Electric's professional ice machine repair. At the same time, it should be noted that after each home appliance is repaired, more or less different problems will occur. Therefore, after the repair is completed, it is necessary to explain to the user the possible problems that may occur after the repair. Certain matters, as well as the correct usage methods that need to be paid attention to in daily life, can effectively extend the service life of the ice machine.