What is the main reason why the steam oven has poor heating effect?

During the use of the steam oven, I often find a problem, that is, I have set the temperature and time, but in the end I find that the temperature does not reach the standard it should be. So why can’t the steam oven reach the temperature it should be? In fact, there are many reasons. According to the experience of the maintenance masters of Hong Kong Junhong Electrical Maintenance, there are many factors causing this.

1. The thermometer is faulty

The thermometer is the only standard for indicating temperature, and is generally controlled by a computer board. Therefore, whether the temperature is standard or not is actually part of the thermometer management. Once there is a problem with the thermometer, you may see that although the temperature has reached, the temperature inside is actually not as high as it should be. It is also possible that the temperature has reached the temperature, but the temperature has not risen because the thermometer is insensitive. Therefore, no matter what the situation is, it means that the thermometer is faulty and only needs to be replaced or repaired.

2. The temperature does not meet the standard

If the temperature has a number but the actual temperature is relatively low, it may be because the heating tube is faulty. At this time, you can check whether the heating pipe is damaged. Because the heating tube is sometimes damaged due to internal stains, the efficiency of the heating tube is not high. Therefore, only the heating tube needs to be replaced to reach the corresponding temperature.

3. Insufficient sealing

Generally speaking, steam ovens need to be sealed to allow the internal temperature to reach a certain height. And if the steam oven is not sealed, the internal temperature will not be able to rise. So you need to check whether it is sealed. The sealing is usually a circle of steam oven rubber around the door, which can achieve the sealing effect. If the rubber edge of the steam oven is damaged, or there are stains around the rubber edge of the steam oven due to long-term use, the sealing performance will be greatly reduced.

However, there are several aspects that need to be paid attention to when replacing the rubber edge of the steam oven. The first one to be the original one is the best. Because different steam ovens often have different requirements for rubber edges, original accessories are often the most suitable. The second is that a professional maintenance technician is required to handle it. Although the rubber edge of the steam oven may seem inconspicuous, once a fault is discovered, it will directly affect the use of the entire equipment. Then a professional maintenance team is naturally a must. Therefore, the more recommended one is Hong Kong Junhong Electrical Appliance Repair. They have researched various brands of steam ovens, so they can often provide original parts or replacement product parts, so that customers have no worries.