Repair the four major problems of Jinzhang washing machine, experience is king!

Washing machines are often one of the electrical appliances with a relatively high loss rate among household equipment, especially when the seasons change or summer, because the usage rate is quite high, various problems often occur. Today, we will analyze the maintenance of Jinzhang washing machines. . And it is explained through the experience of the Hong Kong Junhong electrical repair master, who is relatively famous in the repair industry.

1. Possible problems and troubleshooting of washing machine water leakage

1. If the washing machine is leaking, you need to check the drain pipe first. If the interface of the drainage pipe is loose, or the drainage pipe is broken, then it is possible that water is seeping from the drainage pipe, so you only need to insert the drainage pipe or replace it with a new one to solve the problem.

2. Whether the drainage pump is clogged is also a direction to check. Generally, problems with the drainage pump are caused by dirt. Poor water quality can leave water dirt in the drainage pump for a long time, causing blockage, so it only needs to be replaced or unblocked.

2. Solutions for washing machines that do not stop after running

Washing machine not stopping is also a common problem. Often it cannot be stopped within the time on the control panel, or there is no change in the time data. Then it may be that the stopping device is damaged. Once this problem occurs, it is often necessary to check the control board and the stopping function device, which falls into the category of overhaul. The masters of Hong Kong Junhong Electrical Maintenance will often check more carefully. If they can repair it, there is no need to replace it.

3. Possible problems and solutions to the loud noise of the washing machine

1. Noise problems caused by external fixation. Washing machines often need to have corresponding space after being installed, as well as complete shock-absorbing pads at the bottom. This can avoid loud noises when the washing machine is shaking. So if noise occurs, check the outside first.

2. Parts inside the washing machine are loose. It may be that the filter at the rear is loose, or a certain shaft is loose. Just need to replace it.

4. The drying function does not work

Most of today's washing machines have a spin or drying function. Once this function does not work, there may be several reasons.

1. Too few clothes and too much water. As a result, effective spinning and drying cannot be performed within a fixed period of time.

2. The drying function fails, the frequency decreases, and the rotation speed slows down. This is due to a problem with the computer board. Needs to be repaired or replaced.

3. If the washing machine has a drying function, the function switch or heating element may be faulty. This needs to be repaired and replaced.

The above are the methods for repairing Jinzhang washing machines. You only need to perform maintenance at a fixed time, clean the inside of the washing machine frequently, and check the accessories, and you can often avoid malfunctions.